TonyC
Isuzu Baby
Life's too short, get out and use it!
Posts: 23
|
Post by TonyC on Nov 18, 2006 14:43:48 GMT 11
I have a 94 MU with a sunroof and want to work out why it creates so much wind noise. I have detached the windup and clip part but have not worked out how to get the front hinged part free - Does anyone know please?
|
|
mudslinger
Isuzu Junior
needs more curry
Posts: 105
|
Post by mudslinger on Nov 18, 2006 15:58:41 GMT 11
wen you have unclipped it from the wind up part, lift it up and pull it towards the back of the truck it should slide out
|
|
v8smithy
Isuzu Baby
93 3.1TD MU Manual
Posts: 30
|
Post by v8smithy on Nov 18, 2006 16:12:16 GMT 11
Hi Tony,
mudslinger is right.
I took mine out last week. It was stuck and I was scared of breaking something, wondering if I was doing right.
Just make sure you slide it evenly backwards from both hinges and it wont break anything.
Probably a good idea to make sure your drain holes are clear while its out, overflows can get messy when the seals are old.
|
|
TonyC
Isuzu Baby
Life's too short, get out and use it!
Posts: 23
|
Post by TonyC on Nov 18, 2006 19:23:13 GMT 11
OK guys I've got it - As you pull it backwards it has to be lifted in a curving upwards motion. The "hinge", if you can call it that, is shaped like the curved prongs of a fork.
TIP - Removing one of these from the glass and then trying it in the roof slot was very stiff so I cleaned and car waxed the 2 forks and slots and they slide in much easier now. I used a small flexible steel rule with the rag round it to get inside the slot. You have to hold the large flat spring down as you do it.
Note the 4 holes round the roof channel when the glass is off - ensure they are not blocked. tubes from them must allow rain to go down via the head lining!
|
|
