skip
Isuzu Junior
------1992 MU 2.8TD------
Posts: 107
|
Post by skip on Dec 4, 2006 15:02:45 GMT 11
How do you remove the back seat from a MU? Tools?
From the looks of it a pin punch is needed?
cheers
|
|
|
|
Post by Witchdoctor on Dec 4, 2006 17:38:53 GMT 11
In my 96 model it was held by 4 bolts from memory 2x10mm,2x14mm. Then remove the latch i think 1x18mm. No big deal. Have fun.
Davo
|
|
|
|
Post by mooman on Dec 4, 2006 19:26:05 GMT 11
Yip...sounds about right... but a word of warning.. be careful with the undoing the bolts bit as they have been known to break off.. but yea other than that...have fun..  |
|
|
|
Post by nic513 on Dec 4, 2006 19:34:44 GMT 11
yeah i found it easier to undo the 2 10mm first them the 2 14mm puts more strain on the thinker bolts |
|
|
|
Post by Bruce on Dec 4, 2006 20:07:33 GMT 11
Make sure you put all the bolts back in especially the seat belt bolt other wise you will have a car full of dust and I know.
cheers Bruce
|
|
skip
Isuzu Junior
------1992 MU 2.8TD------
Posts: 107
|
Post by skip on Dec 4, 2006 22:06:10 GMT 11
Lol, I left the bolt out for the seat belt one weekend never again lol.
cheers
|
|
