What would you do??

[manrique]

Hi, Im from Costa Rica, I have an Isuzu KB (holden rodeo), in my country theres not much to buy for isuzus . I was wondering, what would you do to a car like mine?? and also wondering, how do I know if the torsion bar is already "cranked"??


What im planning to do is a SAS and add a dana 44 in the front, I want to lift 5" in the front and in the back, I also want to use 4.88 ¿relations? (dont know how you call it) and I want to put 35" tires

Let your mind free jaja ;D

[elysian]

a 4.88 ratio sounds a bit tall/too big .. probably be better off with a 4.56 ratio , maybe even a 4.3ish if your planning to use 35's ..

for the SAS.. might be easiler if you use some Hilux axles , or Nissan GQ / GU Patrol axles .. but since I don't know whats readily avaiable in Costa Rica .. all this advise might be usless

[geeves]

Wrong way The larger the number the faster the engine turns for a given wheel speed. 4.88 would be best if you can find it.
35s are fairly extreme. What sort of off road driving do you get there? Theres no point doing these mods unless you have a use for them as they do reduce the on road abilities of your truck.
Looking at the pictures I would expect your truck is pretty much standard at present ie torrsions have not been crancked or if they have not by much.
good luck with the project

[bozza72]

Hola y recepción al clubisuzu, biselo la ayuda que usted con un de los agrega encendido, s para usted carro pero usted puede ser que pueda comprar importaciones de los estados para los carros de General Motors. cuando estaba en Costa Rica que vi algún bueno de los carros del camino así que le deseo bien con sus el propio. Excuse por favor mi su del español sido un rato largo puesto que lo he utilizado

[elysian]

*hides in shame*

I'm not sure what I was thinking when I posted the gear ratios.. I blame the 80 hours I have worked this week so far :b