|
|
Post by wayne85 on Jul 24, 2008 16:28:54 GMT 11
Hey guys i just jacked up the back of my mu and while in neutral i hand turned wheels and they spun in the same direction. when i put it in gear and hand turned them they spun in the opposite direction...
|
|
|
|
Post by wayne85 on Jul 24, 2008 17:14:03 GMT 11
any ideas geeves?
|
|
|
|
Post by elysian on Jul 24, 2008 18:02:57 GMT 11
have you got the G80 code on the plaate in the engine bay ?
|
|
|
|
Post by Yarno on Jul 24, 2008 18:04:40 GMT 11
Was it difficult to turn when in gear? If so then yep it's a limo.
|
|
|
|
Post by wayne85 on Jul 24, 2008 18:04:59 GMT 11
what do you mean by a g80 code?
|
|
|
|
Post by wayne85 on Jul 24, 2008 18:14:52 GMT 11
i wasnt very difficult, on saturday when i get to some dirt i might just pop the cluth and check if both wheels spin
|
|
|
|
Post by geeves on Jul 24, 2008 18:36:57 GMT 11
g80 code will be on the vehicle id plate after the chasss no and in the options section. This is no garentee as there are one or two mus around that have no g80 code but do have the lsd but dont apear to have been changed. Also it may of been fitted after leaving the factory.
It sounds like you have a lsd but it might need adjusting which is a job for the experts.
try jacking up only one wheel It should be quite tight to turn.(a torque wrench on a wheel stud gives 60 ft lb before mine moves).
|
|
|
|
Post by Yarno on Jul 24, 2008 18:38:16 GMT 11
The G80 code would be on the plate under the bonnet, it's the build details and G80 is LSD, but mine had a LSD without the G80 code...
|
|
|
|
Post by wayne85 on Jul 24, 2008 18:55:00 GMT 11
i cant find G80 on any of the tags, if it turns out i do have a lsd that needs adjusting does any1 have any idea on how much this ruffly costs?
|
|
|
|
Post by geeves on Jul 24, 2008 20:04:33 GMT 11
Price one from a 89 or later jackeroo or rodeo and take this as a worst case price. They are not that hard to change if you dont mind lying under a heavy wagon supported on axle stands while maneuvering a 30kg lump of steel with your chest. (that how I did mine anyway)
|
|
|
|
Post by wayne85 on Jul 24, 2008 20:19:36 GMT 11
thanks for your help guys ill c what i can find
|
|
|
|
Post by muvit madness on Jan 18, 2009 9:04:10 GMT 11
Hi J-mac diff & gears at arndell park in sydney will tighten em for around 1 fiddy from memory but you need to take the centre to him otherwize expect to pay more>. cheers muvit  |
|
|
|
Post by ono2hi on Apr 29, 2009 20:20:15 GMT 11
i got a lsd diff for sale  |
|
|
|
Post by geeves on Apr 29, 2009 21:00:03 GMT 11
what ratio?
|
|
|
|
Post by ono2hi on May 4, 2009 17:43:53 GMT 11
4.5, im sure its a lsd, i got it out at the mo, if i turn the pinion both rotate the same way and i cant stop it by hand on 1 side. |
|
