|
|
Post by James W on Mar 20, 2009 17:43:35 GMT 11
Can anyone identify a guide bolt part number for a rear caliper (gone missing from caliper). I Have search the Isuzu Manual... and they all look different from whats on the truck (actually Mikes truck). It unusually has a different caliper on that side, the same as my 1991 MU. It's about 100mm long, with 80mm of smooth shank with 20mm of thread at the end... now the fun bit, it doesn't seem to be metric. It is a metric thread (pitch) but is about 8.83mm diameter.... and thats what I measured off my truck.  |
|
|
|
Post by geeves on Mar 20, 2009 20:24:39 GMT 11
Looking at the cd manuals I cant find a reference to that calliper at all. I do have a haynes manual with a few pics though but it probably doesnt tell you anything you dont already know. Also looked through my parts but no use.
Its very likely a holden only part although it might be worth hunting wreckers etc. I was told a Toyota uses the same bolt but dont know which one Think it was a front calliper on corrolla
|
|
|
|
Post by pig75 on Mar 21, 2009 7:37:25 GMT 11
Is it number 12 on the pix (8-94453-386-0)  |
|
|
|
Post by James W on Mar 21, 2009 17:23:12 GMT 11
Thanks David,
that looks like the one... Mike says thanks (it's missing off his truck)... i'm not sure why it's not in the manual.... as mine and his truck has these calipers.. so can't be rare.
... and whats your source for that drawing and part number? Looks like a handy addition to the manuals we already have.
Thanks
|
|
|
|
Post by pig75 on Mar 21, 2009 19:32:59 GMT 11
|
|
|
|
Post by geeves on Mar 22, 2009 9:18:22 GMT 11
the cd manuals we have are for the 86 - 88 which had drums, the tfs which also had drums and the 3.1 bighorn and frontera which had the drum in disc Weve always had a missing manual but the only thing thats not covered is the brake
|
|
|
|
Post by Yarno on Mar 22, 2009 10:00:28 GMT 11
|
|
|
|
Post by mudgrip4 on Mar 22, 2009 12:11:14 GMT 11
Thanks alot guys - I'll go see the isuzu agents here in chch tomorrow and see if I can get one
Mike
|
|
|
|
Post by James W on Mar 23, 2009 9:14:18 GMT 11
the cd manuals we have are for the 86 - 88 which had drums It does have listing for 1999-2000 and rear disk brakes... but not the right ones... Thanks for the link David, and the extra info Yarno  |
|
|
|
Post by mulover on Mar 24, 2009 11:18:23 GMT 11
From memory it is a genuine part only, I've had 2 of these come out on me in the last 7 years.
I think it is a M9x1.25 or M9x1.
Yes there is a M9 size, it is very uncommon, just like M11 (used on volvo engines i think)
|
|
|
|
Post by mudgrip4 on Mar 24, 2009 15:39:25 GMT 11
Thanks guys - rang local isuzu agent and he quoted about $11.00 for bolt and wd have to come from Japan. So rang a bloke who disassembles isuzus and got the bolt for $5.00. All is well..
|
|
