Pics of 3" exhaust

[roga]

I've posted some pics of my 3" exhaust so that you guys may get inspired and follow suit











I have put 12" of 21/2" on the end as was discussed in other threads.
Seems to work great with good power from 1800 through to 4000 rpm
I am using 20 psi boost and it is intercooled
There is a flexi beside the gearbox
2.8 Mu used for 4x4 runs

[geeves]

Looks good even though it might of been wise to remove the shock before welding.
They aint original rear springs on your wagon and very fancy shackles. Are they just anti inversion or something more exotic

[roga]

The shock was moved that is just the paint overspray when they painted the welds.
The springs are from Repco with the overriders removed and the shackles are made to extend when the locking pin is removed, I think they extend to about 7 or 8 " in full and were made for me by Mulover
The extra travel and the front diff lock combine to make a very capable vehicle offroad

[geeves]

Thanks for that. I had a set of mulovers drop shakles that were going to go on the bighorn but the bighorn has a bracket that got in the way and couldnt be cut off as the towbar was bolted to it. I gave these to Harry in Tiru Dont know if he used them