SAS on 2nd gen Rodeo

« Prev
1
Next »

jeremp
Isuzu Baby

Posts: 19

SAS on 2nd gen Rodeo Jan 18, 2007 6:12:32 GMT 11

Post by jeremp on Jan 18, 2007 6:12:32 GMT 11

Since y'all have more knowledge with the Isuzus than guys over here I would like to get your opinions.

I have a 98 Rodeo (http://dieselrodeo.blogspot.com/) that needs a solid axle. I have a few questions about the process:

1) What axle would you recommend? Many of the guys over here use the Toyota axle, some use International. I would like Dana 44.
2) The rear suspension had coils and a four-link (sort of) I would prefer to go four-link in the front as well with the SAS. Any recommendations? Any kits? Anyone doing four-link SAS in Isuzus?

Any input is appreciated.

Thanks

Low cost fun and memories get me out of bed in the morning.

geeves
Administrator

Most Posts & Most Helpful AWARD

Posts: 4,833

SAS on 2nd gen Rodeo Jan 18, 2007 8:56:20 GMT 11

Post by geeves on Jan 18, 2007 8:56:20 GMT 11

I know a few Mus (amigo) that have been converted but no Troopers or Wizards.
There are a few Amigos around the web with very fancy coil over type suspension that obviously works well but probably these are off road only. Over here most people use the Toyota Hilux (Tachoma?) front diff and stay with leaf springs. Coils on the rear and leaves on the front could cause strange handling issues.
Try www.off-road.com/isuzu for a few ideas