|
|
Post by frederick on Feb 3, 2008 7:48:29 GMT 11
Hi, Am wondering if somebody could tell me how to adjust the camber of a big horn lotus handling? Tried looking at the other treads but can't find any. Hope somebody could help.
Thanks and Cheers!
|
|
|
|
Post by geeves on Feb 3, 2008 8:37:12 GMT 11
Its adjusted with shims which go between the top a arm mounting bracket and the chassis. Realy this is a job for a wheel alignment shop. If you have done a lift you may run out of adjustment in which case you need a ball joint flip
|
|
darkhunter
Isuzu Junior
isuzu trooper 2l upgraded to 2.6, injecting later,gonna be a beast soon
Posts: 105
|
Post by darkhunter on Feb 7, 2008 17:04:34 GMT 11
as geeves said frederick,shims adjust camber and caster,
you need wheel alianment machine to see adjustments made and to reset toe
|
|
|
|
Post by dxmedia on Feb 12, 2008 8:43:40 GMT 11
If you've lifted a couple of inches, a rough reset on the camber is to do a reverse ball joint flip - it's close enough for tyre wear, but not perfect for tracking...
|
|
