|
|
Post by dani4JB1T on Dec 10, 2006 12:08:07 GMT 11
i took this route because its the coolest path to take unlike the in and out on the same side type where the cold air is headed up again from the exhaust of the turbo, am agree  |
|
shinz
Isuzu Baby
Posts: 24
|
Post by shinz on Dec 19, 2006 17:22:01 GMT 11
Dani, thanks for the pic of the NKR motor, it might have solved a problem thats being floating around in my brain for some time, has to be an easier way to do a front mounted intercooler, though Conrads solution is way elegant. time to go check some stuff out. ;D Steve |
|
|
|
Post by superturbocompound on Dec 20, 2006 11:50:58 GMT 11
thanks guys for the compliment,you just made my day,
|
|
skip
Isuzu Junior
------1992 MU 2.8TD------
Posts: 107
|
Post by skip on Dec 29, 2006 22:08:03 GMT 11
Please PM me the price of the kit superturbocompound.
cheers
|
|
adam
Isuzu Junior
Posts: 103 
|
Post by adam on Feb 27, 2007 11:40:04 GMT 11
me too please!
|
|
|
|
Post by superturbocompound on Apr 16, 2007 17:08:42 GMT 11
just been to the post office and freight to NZ is nzd80.00, will take 3 months to arrive and there will be no insurance,need to pack it very well in this case.
|
|
|
|
Post by Jimmu on Apr 16, 2007 22:21:55 GMT 11
Bugger Sea Freight.
Whats the $ for air?
Jimmy
|
|
adam
Isuzu Junior
Posts: 103
|
Post by adam on Apr 16, 2007 22:23:48 GMT 11
Hi Superturbocompound,
Could you tell me what are the dimensions of the FMIC in the kit ?
thanks
adam
|
|
adam
Isuzu Junior
Posts: 103
|
Post by adam on Apr 16, 2007 22:27:24 GMT 11
Bugger Sea Freight. Whats the $ for air? Jimmy can I call dibs on your old top mount?  |
|
adam
Isuzu Junior
Posts: 103
|
Post by adam on Apr 16, 2007 22:31:15 GMT 11
Could I also suggest that the main bulk of the postage cost is probably the intercooler itself.
We could most likely do a group purchase of piping off you, and get the intercooler's in Australia (assuming they are the same chinese coolers that you can find on ebay?)
Would that be an option ?
|
|
|
|
Post by Jimmu on Apr 18, 2007 9:38:21 GMT 11
Good idea Adam.
Jimmy
|
|
adam
Isuzu Junior
Posts: 103
|
Post by adam on Apr 18, 2007 12:04:33 GMT 11
Assuming that
a) Superturbocompound is okay with this
b) We can source the same ebay coolers here in australia
Who else would be interested in doing this?
Could people list both that they are interested, and their location. It should work out cheaper to get everything posted from Borneo to 1 place, and then couriered out from there.
I'll kick off...
Yes I am interested, I live in Brisbane
|
|
|
|
Post by dasnoboarder on Apr 18, 2007 17:44:12 GMT 11
I was planning on doing a custom front mount install.
Main things about Superturbocompound's kit ...
I don't like the join into the intake manifold as has been said. And I would rather have 2.5" piping.
Not sure what the custom job would cost. Need to do more investigation.
I may be interested, I live in Auckland, NZ.
|
|
|
|
Post by superturbocompound on Apr 19, 2007 14:41:48 GMT 11
no problem guys,i'll do the piping only if you want,don't need to be urgent about the bulk order because i have to redo some of the piping if its a mu,further more i'll look into 2.5 inch piping.but only from intercooler outlet to the inlet manifold,no promises...i need to negotiate with the wreakers if i can hire the half cut to the intercooler piping specifically the isuzu mu.
|
|
adam
Isuzu Junior
Posts: 103
|
Post by adam on Apr 19, 2007 14:48:44 GMT 11
Before you go to far, we need to confirm that we can get the intercooler in Australia first.
I have contacted the manufacturer, just waiting on a reply from them.
Once that's done, I will get final numbers so you can estimate the postage costs etc & see if it is worthwhile doing.
Will try and get back to you within a week - just a matter of the manufacturer getting back to me first.
Thanks again for your assistance!
cheers
adam
|
|
|
|
Post by superturbocompound on Apr 19, 2007 17:32:14 GMT 11
the wreakers have sold the mu with the 4jg2 engine so its going to be difficult to sell the 4jb1 unit to those running the 4jg2 engines,as for the 4jb1t ,the engine bay looks identical to the rodeo's.
|
|
adam
Isuzu Junior
Posts: 103
|
Post by adam on Apr 19, 2007 18:09:33 GMT 11
So are you saying the kit you have made for your Rodeo/4jb1 should be identical to the MU/4jb1 that we have over here?
|
|
|
|
Post by superturbocompound on Apr 19, 2007 20:47:08 GMT 11
should be,i'll go the wreakers tomorow and take some pics for your confirmation
|
|
adam
Isuzu Junior
Posts: 103
|
Post by adam on Apr 20, 2007 0:19:45 GMT 11
Okay no problems - cheers for that.
|
|
