|
|
Post by Shorts on Mar 23, 2006 20:59:05 GMT 11
I'm looking at a set of rear lift coils for an '04 Rodeo and curious as to if they'll fit my '96 Wizard. I realize rates can be different, but will they fit the perch?
|
|
|
|
Post by geeves on Mar 24, 2006 8:19:36 GMT 11
good question. Get the measurments of free length and diameter to be sure but theres a good chance they will fit Spring rate might be a little hard but wont be too bad
|
|
|
|
Post by Shorts on Mar 24, 2006 11:47:41 GMT 11
I'll get mine measured. The springs are VSW, which I've heard rumors they tend to sag after a bit.
I've been told on another board my setup is similar to a Trooper and/or Vehicross and most Isuz SUV coils are interchangeable. Is that true?
|
|
|
|
Post by geeves on Mar 24, 2006 15:36:48 GMT 11
could be true but not sure. If these were for an american Rodeo they will fit as the american rodeo is a wizard in lhd
|
|
|
|
Post by Shorts on Mar 25, 2006 21:29:43 GMT 11
I didn't get free length but I got the diameter at 5.25" outside edge of the coils. Anyone have the diameter for their truck handy?
Edit: For the sake of reference, the 2nd Gen Rodeo coils are the same diameter as the '96 Wizard (JPN).
|
|
