drdan
Isuzu Baby
Posts: 3
|
Post by drdan on May 30, 2007 4:58:19 GMT 11
Hi All, new guy from the USA. I have aqquired 2 4JX1 engines with the intention of replacing the gasoline powered Chrysler engines in my older houseboat. Apparently, these engines are rare in the USA. They were test stand engines at a school used mostly for shows. They have almost no hours, ran great, and look new. My problem is I can't come up with a number for the ECU/ ECM to run the electronics. When I picked up the engine ,the ECUs on the test stands came up missing before I could get them or even get the number.The wiring, etc. will be no problem as I've been an ASE Master Auto Tech and a commercial and residential electrician for many years. The bolt-up is fairly simple and the existing outdrives are well suited for this swap. I'm hoping that the guys that drive on the correct side of the road can help with a part number and maybe a source. Thanks, Dan
|
|
drdan
Isuzu Baby
Posts: 3
|
Post by drdan on May 30, 2007 5:14:36 GMT 11
PS. I was told these were 1998 models, Thanks, Dan
|
|
|
|
Post by geeves on May 30, 2007 7:33:42 GMT 11
Only suggestion I can come up with is to get a couple from wrecks.
Try www4x4isuzu.com They are in Auckland but ecus are small so freight shouldnt be a problem.
Before installing these engines do a search in google on 4jx1
They are good engines but have a couple of potentialy nasty suprises to watch out for.
Biggest one is the injector seals which can destroy the engine or your boat when they leak
|
|
drdan
Isuzu Baby
Posts: 3
|
Post by drdan on May 30, 2007 11:40:25 GMT 11
Geeves, Thank you !!! I now have a number for ECUs for these engines and have my parts "bloodhound" on the hunt. Acy76 on 4x4wire found a complete set-up for sale on E-bay and I got the number from them. Thanks to all and if anyone is interested I'll post progress reports as I go. Thanks again, Dan
|
|
|
|
Post by caffa on May 31, 2007 8:44:03 GMT 11
G'Day drdan, Would love to hear the progress on the transformation of hearts in the houseboat ... Please feel free to keep us "posted" .. no pun intended ... lol
|
|
