Post by Kes on May 10, 2004 23:37:08 GMT 11
Hey guys, I recently replaced the engine in my '91 MU after i bent a conrod taking it swimming (oops 
). I thought i'd share some pics of it with you here...
It took 3 days in total, though we probably could have finished it in 2. I put a new clutch on it, got one for a Jackaroo and it was a perfect fit.
I got the new engine from an auto transmission, where as mine is manual. The 2 bottom bolts on the bellhousing are different in the manual, so my MU is currently down 2 bellhousing bolts while i come up with a solution, other than that the changeover went fairly smoothly..
![]()
members.optusnet.com.au/koowah/change2.jpg [/img]
The hole left in the engine bay...
![]()
members.optusnet.com.au/koowah/change3.jpg
[/img]
lining up the new engine
![]()
members.optusnet.com.au/koowah/change4.jpg [/img]
the new engine in, now we just have to connect everything back up
). I thought i'd share some pics of it with you here...It took 3 days in total, though we probably could have finished it in 2. I put a new clutch on it, got one for a Jackaroo and it was a perfect fit.
I got the new engine from an auto transmission, where as mine is manual. The 2 bottom bolts on the bellhousing are different in the manual, so my MU is currently down 2 bellhousing bolts while i come up with a solution, other than that the changeover went fairly smoothly..
The hole left in the engine bay...
[/img]
lining up the new engine
the new engine in, now we just have to connect everything back up