stereo loom plug pinout

[bmcg]

Hi i have a 97 wizard ,and want to put a different

stereo , just wondering if any one knows the loom plug

pin out !! - which wires are what speaker etc

any help would be appreciated

Thanks

[Graham]

I should know this answer! I replaced mine with a JVC unit & stacker and it wasn't very hard, I just can't remember if I had a diagram for it.

If you've done a stereo swap before then it's pretty easy & I'm sure it uses standard wiring colours, which from memory are:
red - ignition power
yellow - fused battery power
orange - remote lead for antenna &/or amplifier
black - earth (duh!)

Then there's 2 sets of:
white
white w/black stripe
grey
grey w/black stripe

These 2 sets of 4 wires make up the left & right speakers for front & rear but which set is front/rear and which colour is for left/right I can't tell you.

Cheers! Oggy.

p.s. actually that wasn't all from memory, I just dug out the wiring loom from the original Clarion head unit that came with my '95 MU. ó¿ó<br>

[Dave]

The other thing you can do, (if you cant be bothered looking at what colour the wires are going to each speaker), is once you have hooked up, or at least know which 8 wires are for your speakers, use a aa battery or similar and connect 1 wire to it, then connect the others one at a time until you hear one of the speakers make a clicking sound when the 2 wires are on the battery.
Just keep doing this until you have all your speakers sorted (make sure as you find each wire configuration you tape them or move them aside )

Dave