mymu
Isuzu Baby
Posts: 27
|
Post by mymu on May 30, 2006 10:49:17 GMT 11
Hi, Does anyone know the wheel alignment specs for a 1994 MU, i tried using the rodeo specs and it is chewing out the inside of my drivers front tyre.
The tyre places i have been to haven't got the specs for the MU. If anyone can help it would be greatly appreciated.
Dane Coulter
|
|
Les
Isuzu Baby
Posts: 28
|
Post by Les on May 30, 2006 17:39:53 GMT 11
Hi Dane
specs are as follows all in degrees camber -0.50 to 1.50 caster 1.75 to 3.25 sai 9.00 to 11.00 included angle 8.50 to 12.50 Toe should be 0.0mm to 2.0 mm cross camber -0.75 to 0.75
cross caster -0.58 to 0.58 total toe0.0mm to 4.0 mm hope this helps if you want rear stuff as welllet me know but it can be hard to correct
cheers Les
|
|
|
|
Post by dasnoboarder on May 30, 2006 18:12:07 GMT 11
Would this be the same for a 1993 MU?
|
|
|
|
Post by geeves on May 30, 2006 18:25:43 GMT 11
All Mus pre 98 are the same. Wouldnt be suprised if the new ones are also the same.
|
|
mymu
Isuzu Baby
Posts: 27
|
Post by mymu on May 31, 2006 0:46:10 GMT 11
Awsome, Thanks Les, If you have those rear specs that would be awsome, but if i can do anything about it is another thing. I think my turbo is on the way out aswell :-( im gunn go cry
but thanks guys
Dane Coulter
|
|
Les
Isuzu Baby
Posts: 28
|
Post by Les on May 31, 2006 16:37:37 GMT 11
Hi Dane
heres the rear specs camber -1.00 to 1.00 degrees toe -1.0 mm to 1.0mm total toe -2 .0mm to2.0mm best of luck with the turbo also
cheers
LES
|
|
