|
|
Post by pdowdle on Jul 11, 2006 10:40:45 GMT 11
I have to replace the rear rotors of my Isuzu 2.8 DT MU, is somebody able to give me a brief description as to how this is done, cheers I will have to do the brake pads as well, but this should be quite easy
|
|
|
|
Post by geeves on Jul 11, 2006 12:14:47 GMT 11
according to the book you take the wheel and calliper off (the 2 large bolts that hold the whole brake assembly is the best way for this) then find the threaded hole in the rotor and wind a m10 bolt into the hole wich will pop the rotor off the hub.
On mine this hole was so full of mud etc that I couldnt use it but a couple of light taps on the back of the rotor while pulling in the same direction on the other side of the rotor did the trick.
easy
|
|
|
|
Post by pdowdle on Jul 12, 2006 12:36:40 GMT 11
Fantastic advice, thank you came off quite easy and fast to replace Thank you
|
|
