Dave
Isuzu Senior
Posts: 169
|
Post by Dave on Apr 18, 2004 15:34:18 GMT 11
Can anyone provide tips/advice on installing a boost guage in my 92 Bighorn? Not really sure which hose I am supposed to connect to. Cheers
|
|
Garth
Isuzu Senior
1989 Bighorn Irmsher R LWB
Posts: 164
|
Post by Garth on Apr 18, 2004 19:38:03 GMT 11
Hi Dave,
There should be a small hose going from the intercooler to the fuel pump, on mine it comes out just above the turbo, forward of where the inlet to the intercooler is.
This hose provides a pressure signal to your fuel pump so it can compensate for increased boost. if you cut the hose and fit a T to it, then reconnect to your boost gauge and the fuel pump it should all work sweet :-)
|
|
|
|
Post by garyq on May 3, 2004 20:49:41 GMT 11
Garth: is this for a 4JG2, 3.1Tdi engine? I'm planning also to install a boost gauge. Thanks! ;D
|
|
|
|
Post by James W on May 5, 2004 7:20:35 GMT 11
Just think about what you actually want to measure. If you want to measure imlet manifold pressure then tap into a line connected to the inlet manifold... as Garth suggested. You could actually measure anyting you desire
|
|
