|
|
Post by justin on Oct 16, 2004 16:07:23 GMT 11
Anyone know the best place in AUS to get one of these for my 94 MU? Repco just quoted me $112 a wheel which seems expensive looking at some of the recent posts. J
|
|
wayne
Isuzu Baby
Love mods
Posts: 47
|
Post by wayne on Oct 16, 2004 23:22:20 GMT 11
What do you get in the kit?
Isuzu uses an oddball size bearing which means higher price!
W.
|
|
|
|
Post by justin on Oct 17, 2004 0:56:47 GMT 11
That's a good point maybe it includes the needle roller bearing which I don't need? I will check on Monday. The price they're talking about in Kiwi land is $60 odd bucks which is half the price! J
|
|
Garth
Isuzu Senior
1989 Bighorn Irmsher R LWB
Posts: 164
|
Post by Garth on Oct 17, 2004 17:04:16 GMT 11
The NSK kit I got here in NZ was about $62 a wheel. Includes inner and outer bearings and the inner hub seal. KOYO bearings 32009JR21 and 57407-N where the ones that came out of my 1989 Bighorn, and the seal was CR9A 69 75 10 N
I would suggest also replacing the needle roller bearing while you are at it too and the seals associated with it as this can be a cause of leaks that will stuff the rest of your bearings (as happened to me).
hope this helps.
would suggest approaching a specialist bearing shop or for a price, mine came direct from a holden/isuzu parts supplier and were about as cheap as they come. Would expect REPCO to be about 25% more expensive
|
|
|
|
Post by justin on Oct 18, 2004 12:56:58 GMT 11
Just got in touch with NSK Australia and they put me over to The Bearing Traders at 1/36 Holbeche Rd Arndell Park, Tele:9622-9322. The have 2 kits for a Jackeroo 4JG2 at $62 each side. Only problem is there is a different kit for up to September 1994 than the October 1994 onwards??? Yet Repco just have the same kit for the whole year? So I took a punt for the later one and I'll let you know the result. J
|
|
|
|
Post by Roger on Oct 19, 2004 18:32:48 GMT 11
To be 100% sure. Take it apart and plonk it on the service desk of someplace that knows.
|
|
|
|
Post by justin on Oct 19, 2004 22:41:06 GMT 11
That's a happening tomorrow  |
|
|
|
Post by justin on Oct 20, 2004 19:20:49 GMT 11
All done and they were a perfect fit. So for late 94 4JG2 MU use NSK 4276 Wheel bearing kit at $63.45 per side. I will be updating the Sydney web site in a week and it will include a list of parts I have known so far. It will then be up to anyone to send me updates. It is for MU's at the moment seeing as we don't have much else here but maybe an equivelant NZ one should appear detailing other models?  ??  |
|
?? 