skip
Isuzu Junior
------1992 MU 2.8TD------
Posts: 107
|
Post by skip on May 13, 2007 13:08:28 GMT 11
What size oil cooler is needed for a 92' MU 2.8TD AUTO?
Are they easy enough to install yourself? What needs to be removed in order to get them in, bullbar, ect.
cheers
|
|
skip
Isuzu Junior
------1992 MU 2.8TD------
Posts: 107
|
Post by skip on May 13, 2007 13:09:36 GMT 11
BTW, I will get a PWR one as they are on sale at Repco this month.
cheers
|
|
|
|
Post by geeves on May 13, 2007 16:41:58 GMT 11
I havent done one on a Mu but did on a previous car. Its realy just a matter of cutting the current cooler lines and running them through the new cooler and bolting it somewhere suitable.
One thing I would do different to the suplied instructions is to fit 2 T pieces so one half of the fluid still goes through the cooler in the radiator. 2 reasons for this 1 if the cooler blocks the other half still works. 2 Autos can have very rough changes when cold The radiator cooler acts as a heater untill the auto reaches the same temp. I didnt have this option on my wagon as I had a radiator from a manual Gear shifts were very rough for the first 10km of any journey
|
|
