|
|
Post by chooknz on Mar 11, 2007 7:46:28 GMT 11
If an ad for a nudge bar says it is for a UCS55, will this bolt directly onto a UCS69??
And... Are nudge bars for a Mu still available commercially new, or is second hand the only way to purchase?
Thanks.
|
|
|
|
Post by mooman on Mar 11, 2007 21:18:02 GMT 11
Not sure about the numbers but you can still buy new nudge bars for most mu's over 1995, my source informed me that there was a few left though out nz.. but you can buy a second hand 1 for 1/2 the price and most are in really good condition.. Let me know how you get on with the number matching please.
|
|
|
|
Post by chooknz on Mar 12, 2007 14:24:54 GMT 11
The numbers are the models... I have a 96 Mu that is a UCS69, with 4gj2 engine, I believe the UCS55 is the older Mus, with the 4bj1 engine (2.8TD). Although not 100% sure!!
Where does your source say the nudge bars are available from???
I can get one fitted here in Chch at Blackwells Engineering, but this would be a generic one, and cost $280, plus 25% for galvanising (?Chroming).
|
|
|
|
Post by mooman on Mar 12, 2007 16:00:13 GMT 11
go to your nearest holden dealer... they should be able to help u out with a new nudge bar and should cost a lot less than $280.. I spent a bit of time last month lookin around for the same bar but went for a shock up grade instead..  |
|
