rim offset

[daisy]

Hi there im running 32x11.5x15 on 15x7" rims off a safari theyre
all good but as my truck goes up id like make it a bit wider too
Im going to get some new rims and wanta know what offset would
be good running these tires i dont mind adding flares what are you
running?

thanks Mike

[redbull]

Mike

I'm running 285/75/16's on Nissan GU rims(16x8). Still rub a bit on the inside on the backwheels. I've heard landcruiser have a more negative offset with a 15x8" rim. Should fill the guards nicely.

[dxmedia]

I'm running 32"x10.5 with 16x8's and I needed 35mm spacers to counter the track being pulled in with a 3" lift on the IFS.

It worked out that spacers were cheaper then new rims.

[nig]

It might be cheaper, but if you are using it on the road you might find it isnt legal - that the situation in this country (Aus) anyway

[dxmedia]

Shame spacers are fine this way, shame cus a whole set of rims can work out $$$

[geeves]

In NZ you can have spacers BUT they must be the type that bolts to the hub separatly from the rim and they need certifying at $400
Bigger tyres need certifying anyway but still better to get the right rims

[daisy]

yeah i thought about spacers but na ill be going for another set rims
ive got a steel rim and tyre here borrowed from a friend with a backspace
of 85mm and outside measurement of 140mm with the same size tyre
as mine and it looks good il have to fit flares but thats cool and it will make
my track a bit wider il take it to my local tyrer man and find out the
offset and cost of rims then start looking second hand if too much $$$$
what offset are you others running if you know? and any pics would be
good i know its not about looks but with this another rim on it looks heaps
fatter ph fat that is ahah