|
|
Post by blackmu94 on May 5, 2008 12:09:16 GMT 11
hello just wondering where the best place to get the plastic plug and oring that screws into the bottom of a z304 fuel filter mine is a bit chewd up and doesnt seal properly
|
|
|
|
Post by geeves on May 5, 2008 12:49:19 GMT 11
o ring is just a nitrile rubber o ring. Otherwize try a wreckers. That filter goes on just about everything so dont feel ashamed looking at surfs and pajeros
|
|
|
|
Post by Roger on May 5, 2008 12:53:31 GMT 11
If I remember correctly, the filter box says it fits Mitsu Triton diesel and old gemini diesels too.
|
|
|
|
Post by blackmu94 on May 5, 2008 13:01:36 GMT 11
sorry bit info im in canberra australia wreckers are a bit hopless round here. would repco have something like that?  |
|
|
|
Post by geeves on May 5, 2008 18:31:27 GMT 11
Any hardwhare or seal or auto shop should be able to match the oring if you take it with you. Unless the actual surface the oring sits on is damaged the plstick part should be ok
|
|
|
|
Post by blackmu94 on May 6, 2008 11:13:08 GMT 11
its the plastic plug thats damged
|
|
|
|
Post by geeves on May 6, 2008 11:21:50 GMT 11
try your local holden dealer first Its the same on the diesel jackeroos till 97 and rodeos till a little after that. Otherwise look under the bonnet of a mates surf or prado to get there chassis no and go to the toyota dealer It will be the same part
|
|
