greg
I'm only here to get Information
Posts: 0
|
Post by greg on Apr 13, 2004 13:48:23 GMT 11
Hi there My leather steering wheel is falling apart from the sun and I remember reading several weeks ago about this but for the life of me, I can't find the posts anymore. Can anyone tell me if I can fit a MOMO steering wheel stright onto my 92 MU or do I need to also buy a BOSS kit. If so, which kit will fit. [glow=red,2,300]Thanks heaps.[/glow]  |
|
|
|
Post by geeves on Apr 13, 2004 16:41:03 GMT 11
The irmshire has a momo wheel as standard and if yours is leather it is probably this one On the back of the wheel it will be labled as momo ans any other momo will fit .
|
|
greg
I'm only here to get Information
Posts: 0
|
Post by greg on Apr 15, 2004 10:11:46 GMT 11
Cheers Geeves, I pulled my steering wheel of last night but could not find any markings on it at all. I am unsure what a irmshire is. Is that a steering wheel make. My wheel does not apear to use a boss system at all as the steering wheel is secured directly onto the steering shaft. However, it is the stock Isuzu wheel. Any ideas. [glow=red,2,300]Thanks Heaps[/glow] |
|
|
|
Post by Yarno on Apr 15, 2004 20:35:18 GMT 11
If it is the standard MU wheel, then yes you will have to buy the boss for it, I would just ask for a rodeo one as they have the same dash and same wheel but it's not leather (or leather substitute (as I am not sure it is leather))
|
|
|
|
Post by geeves on Apr 15, 2004 20:49:51 GMT 11
The irmshire is a variant of the bighorn It has the momo wheel as standard so the boss from one of these with the same problem would fit The supplier of your new wheel should be able to advise on the boss kit.
|
|
