|
Post by holden on Jun 21, 2008 9:33:17 GMT 11
Im looking at installing a adjustable boost controller and boost gauge to my 91 2.8T D Mu . The motor is stock standed with a oil catch can and no intercooler.
What boost psi should i run??
kane
|
|
|
Post by geeves on Jun 21, 2008 10:43:49 GMT 11
15 is a good start
|
|
|
Post by holden on Jun 21, 2008 14:05:26 GMT 11
is it an easy job to do??
|
|
|
Post by geeves on Jun 21, 2008 14:29:35 GMT 11
the bleed screw types are very easy but even easyer is to just clamp off the hose between the output of the turbo and the waste gate. No need to build a controler or fit. You also always get max boost which is good for a diesel. My waste gate has been siezed shut for years.
|
|
|
Post by holden on Jun 21, 2008 14:40:58 GMT 11
what like block it right up
|
|
|
Post by holden on Jun 21, 2008 17:44:44 GMT 11
what pipe do i run it all off lift of right in pic thx kane
|
|
nig
Isuzu Junior
94 TD Rodeo
Posts: 123
|
Post by nig on Jun 21, 2008 17:59:54 GMT 11
Boost contoller needs to tap into the tube on the right
|
|
|
Post by holden on Jun 21, 2008 18:03:56 GMT 11
thank you nig.
|
|