richie
Isuzu Junior
Posts: 112
|
Post by richie on Jun 30, 2005 0:52:52 GMT 11
anyone out there might know where i can get my hands on a Isuzu MU bullbar or grill guards?
Or would the frontera bullbar fit the MU?
|
|
|
|
Post by caffa on Jul 3, 2005 15:18:32 GMT 11
My reply is a little off topic in this section but I have a 2001 Frontera TJM T1 bullbar stitched on to my MU. Only required custome mounts and a fill plate.
|
|
richie
Isuzu Junior
Posts: 112
|
Post by richie on Jul 3, 2005 21:23:33 GMT 11
did you get that fitted on? or you didnt it urself?
How much did you end up spending?
|
|
|
|
Post by JustinW on Jul 8, 2005 20:42:31 GMT 11
I have a 2002 (from memory) Holden Rodeo winch bar from ARB on my Wizard. Bolted straight on, nearly. Have a look at the pics in the link below.
|
|
|
|
Post by caffa on Jul 8, 2005 21:36:26 GMT 11
The Frontera bar is spot on for width but as the Frontera is a bit rounder in the snout, I had a fill plate made to make it look all pretty. Looks good, sits flush with the top surface of the bar. Bought the bar off ebay with a $550 winning bid. Paid him $500 on the day, got a set of Hella driving lights thrown in too. Paid $85 bucks for the polished fill plate (cts). Used the factory bar mounts and restitched them where they had to be, put in some angle and fms for extra strength and there it sat. ;D ![]() members.oztralia.com/~federalaffair/frontera bar.jpg[/img] Clicky HERE to see it on the vehicle. It is still under contruction but there is a pic on the front page |
|
|
|
Post by caffa on Jul 8, 2005 21:37:05 GMT 11
Thanks to the admin for moving this thread ...
|
|
richie
Isuzu Junior
Posts: 112
|
Post by richie on Jul 9, 2005 23:56:45 GMT 11
caffa did you fit the bar urself? if so what mods did you do?
|
|
|
|
Post by caffa on Jul 10, 2005 8:32:22 GMT 11
hmmm .... yes i fitted the bar myself. i used the factory mounts and changed the shape of the factory mounts to suit and added a bit more steel to them (the factory mounts) for added strength. i then had a metal plate made to fill a gap at the top that i didnt like (nothing structurally wrong, it just looked crappy to me). see reply #4 to this thread.
|
|
|
|
Post by Pissy on Jul 12, 2005 14:02:56 GMT 11
I got mine off ebay too for a CHEAP $270 for a Rodeo winch Aluminum bullbar, I don't know what model it was but it had "universal mounts" on it, straight bolt on, had Midas fit it for me total cost $400 for bullbar and fitting.
Try maybe TF rodeo model bullbars?
Best eBay buy i have had yet!
|
|
