|
|
Post by elysian on Oct 20, 2008 20:19:36 GMT 11
I need to replace pretty much all my vacuum lines as they are all rigid and/or cracked ... some have even fallen off what ever they were attached to .. one maybe two of the lines have completely disappeared ..
So, I'm looking for a manual/workshop handbook/etc that shows what each vacuum line goes from and to ...
|
|
|
|
Post by geeves on Oct 20, 2008 20:35:43 GMT 11
sending a copy of the engine manual to your email. Will be a good test of my new broardband as its 7 meg
|
|
|
|
Post by elysian on Oct 21, 2008 5:36:35 GMT 11
Thanks Alan, I got the pdf file fine  BTW, it was 8MB in size .. I had a quick look through it but didn't see any diagrams of the vacuum line layouts .. only how to test/chech the VSV valves .. |
|
|
|
Post by holden on Oct 21, 2008 6:19:12 GMT 11
I replaced all my vacuum and boost lines with 3mm ID Blue silicone vacuum hose. It was easy but the line to the vacuum pump took some time and I still had all my old hoses.
good luck
kane
|
|
|
|
Post by geeves on Oct 21, 2008 6:33:20 GMT 11
From memory if you disable the egr valves the only hoses you need are the large one to the brakes,one to the top of the fuel pump and one to the solinoid on the side of the pump for the air con. If you have the egr valves there is a set of hoses that conect via a valve on the left inner gaurd but this had all been removed from mine before I bought it
|
|
BTW, it was 8MB in size .. 