|
|
Post by mudamu on Oct 30, 2008 11:12:46 GMT 11
|
|
|
|
Post by geeves on Oct 30, 2008 15:44:32 GMT 11
Thats thorough Im going to send the link to Francesco to add to the main clubisuzu page. Follow these and you cant go wrong Only things to watch are that Amigos are LHD and petrol.
Only other minor differences are that we dont use a 3 inch spacer on the back mount but it could be a good idea as it might prevent a cracking problem that sometimes occurs at the center mount and we generaly cut the floor pan instead of bending the gearstick. Your choise on this one If auto things are much simpler and I didnt see mention of the radiator shroud which sometimes needs to be trimmed
|
|
|
|
Post by mudamu on Nov 1, 2008 18:01:47 GMT 11
|
|
|
|
Post by geeves on Nov 1, 2008 19:57:14 GMT 11
Reading the fine print I get the fealing that these could be exactly the same as the Holden ones but still a very good price even with the exchange rate and probable freight cost. Nobody buys ball joints from Holden as you get the sameones at the local auto store at half the holden price.
|
|
