|
|
Post by Roger on Apr 12, 2008 10:47:16 GMT 11
Hi all.
I'm looking at fitting goodyear MTR 32x11.5" tyres when the current rubber needs changing. I've got Ray's engineering wheels but don't know the offset. The MU has been lifted a couple of inches.
I want to know if there could be rubbing issues with full lock and wheel articulation.
Cheers.
|
|
|
|
Post by James W on Apr 12, 2008 17:43:17 GMT 11
Yes, sure have... and I'm not the only one. I have 33"x 12.5". Yes you need the correct offset rims which I forget what. 1" suspension lift and 35mm body lift. The front plastic spoiler needs a trim, a very small bit of sheet metal somewhere around there. A bracket or something if I remember correctly... almost nothing to that. and the rear of the front guards have to be cut. I got a panel beater to do it... can't tell it's done. $170 all up including paint.... very happy with that.... nothing done to the rear to make it all work :-) The biggest issues are at full lock AND full articulation. Also note a body/suspension lift raises the top of the wheel arch, but doesn't have as much effect at the side of the wheel arch.  |
|
|
|
Post by Jimmu on Apr 12, 2008 20:02:14 GMT 11
I have 3" on the back and the front would up 2" with a 2" body lift. With teh landcruiser offset I run 33" x 12.5's
Jimmy
|
|
|
|
Post by Bruce on Apr 13, 2008 19:18:32 GMT 11
I have a set of Ray's mags, there are 16x8's and run 265/75 16's MTZ's and no problems.
Cheers Bruce
|
|
|
|
Post by mudgrip4 on Apr 13, 2008 20:04:37 GMT 11
If you guys can find out your exact offset that could be very helpful.
|
|
