|
|
Post by mudgrip4 on Mar 4, 2009 17:52:06 GMT 11
Have a minor issue with seat-back loosening and leaning backwards too quickly on the recaro seats in my 88 bighorn. Position adjusts with the large black wind-up knobs on side of seat. Have done up all the obvious screws but no joy. Does anyone have a solution to this problem? Thanks
|
|
jer0
Isuzu Junior
Posts: 63
|
Post by jer0 on Mar 4, 2009 19:25:59 GMT 11
I've heard this is an issue with alot of the early recaro seats and the only solution is to weld the mounts solid
|
|
|
|
Post by geeves on Mar 4, 2009 19:46:28 GMT 11
There is anouther way. The problem is that the clutch washer wears out and is not replaceable as its made of strange stuff. I fixed mine by undoing the philips screw in one side and putting a thick rubber washer in there and putting it all back together. Its quite tight to adjust afterwards which is why you only do one side. I think the washer is actually a hose fitting washer. Both seats were done 9 years ago and still good
|
|
|
|
Post by mudgrip4 on Mar 5, 2009 8:03:02 GMT 11
Great - thanks for that - will find some washers this weekend.
|
|
