Vineboy
Isuzu Junior
96 MU-Keep honking, I'm reloading
Posts: 62
|
Post by Vineboy on Aug 8, 2006 20:25:03 GMT 11
Hi guys,
Does anyone make a decent off the shelf bullbar? ARB and TJM said they don't but there must be someone or am I just asking the wrong question ie will a Rodeo or Frontera one fit?
Cheers in advance
Andrew.
|
|
Paaji
Isuzu Senior
94 3.1 Auto
Posts: 172
|
Post by Paaji on Aug 8, 2006 23:17:13 GMT 11
TJM do make one - I have it attached to the front of my MU. I beleive it's a Rodeo one.
If your local TJM store says no, tell them it has been done at TJM R&D in Brisbane.
J
|
|
|
|
Post by dasnoboarder on Aug 9, 2006 17:01:20 GMT 11
Paaji, can u post a pic?
Interested in getting the same set-up.
|
|
|
|
Post by mustu on Aug 9, 2006 17:50:38 GMT 11
In theory shouldn't a Rodeo one of the same year fit? The only thing will be a front guards will protrude from sides a bit since the guards are flared more than the Rodeos.
|
|
|
|
Post by Jimmu on Aug 9, 2006 18:19:15 GMT 11
|
|
Vineboy
Isuzu Junior
96 MU-Keep honking, I'm reloading
Posts: 62
|
Post by Vineboy on Aug 9, 2006 20:53:13 GMT 11
Thanks Jimmy, I have a TF which I'm trying to sell. Might take the bar off it and do the ol' switcheroony  If the bullbar will fit the MU will the bumper and stuff under the bumper fit the Rodeo? I know it sounds like a stupid question but just in case...Does your fit OK? |
|
Paaji
Isuzu Senior
94 3.1 Auto
Posts: 172
|
Post by Paaji on Aug 9, 2006 22:51:25 GMT 11
I'll post a pic when I get home tonight - approx 12:30.
J
|
|
Paaji
Isuzu Senior
94 3.1 Auto
Posts: 172
|
Post by Paaji on Aug 11, 2006 2:17:19 GMT 11
It's a frozen bar as well. J  |
|
Vineboy
Isuzu Junior
96 MU-Keep honking, I'm reloading
Posts: 62
|
Post by Vineboy on Aug 16, 2006 21:03:44 GMT 11
Update. I took the bullbar off the TF rodeo (1999) and swapped it for the original bumper and nudge bar off the '95 MU. Fits pretty well except the bullbar (Alloy Barjo one) now sits about 4 inches out in front on the MU and the MU bumper sits almost under the Rodeo grill and pokes out a tiny bit at the sides. Still only an expert will spot the diff. All holes lined up perfectly. Andrew. PS I rang to get a price on a new "Barjo" (Company that made the Rodeo one) bar. AU$1595.00  |
|
|
|
Post by caffa on Aug 21, 2006 0:58:49 GMT 11
TJM T1 Frontal Protection Bar from a Frontera fits very well with one noticable difference. The Frontera is rounder in the snout so there is a gap between the middle of the bar and the middle of the MU. The sides match perfectly and it looks great other than the middle bit ... See here for a quick squiz. dont bother going in, I have been too slack to do anything else yet ... |
|
If the bullbar will fit the MU will the bumper and stuff under the bumper fit the Rodeo? I know it sounds like a stupid question but just in case...Does your fit OK?
