Boost Guage Install

Paaji Isuzu Senior 94 3.1 Auto Posts: 172	Boost Guage Install Aug 5, 2006 2:03:33 GMT 11 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Paaji on Aug 5, 2006 2:03:33 GMT 11 Hey Folks, Anyone installed a boost guage? Was wondering which line you used for the air feed. Thanks, J

pig75 Isuzu Guru DAVID Posts: 323	Boost Guage Install Aug 5, 2006 7:59:52 GMT 11 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by pig75 on Aug 5, 2006 7:59:52 GMT 11 Put a t piece in the line between the small hose on the turbo outlet and the wast gate control valve. that’s the easiest place
	92 MU, 91 MU ute, 90 MU Australia's loudest MU MY SITE SPL 152.3dB If beef is in beef mince, What is in pet mince?

Jimmu Isuzu Deity 1993 Blue 2.8 Manual Posts: 596	Boost Guage Install Aug 5, 2006 9:20:42 GMT 11 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Jimmu on Aug 5, 2006 9:20:42 GMT 11 I fitted mine into the line running from the inlet manifold to the fuel pump. You can see the T peice in this pic at the end of the blue line i83.photobucket.com/albums/j317/jimmybarrell/step2small.jpg Jimmy
	1993 MU 2.8L TD - Boosted, Fueled, 'Cooled, Lifted and Locked! 2.5" mandrel bent exhaust with custom dump, EGRs removed, Snorkle and Uni Filter, Intercooled, Inline boost controller @ 17PSI, 2" Body Lift, 3" Suspension Lift, 33" Mudders, Custom LSD rear and Lokka Front with 100HP 880lb-ft (4th) where it counts.

Paaji Isuzu Senior 94 3.1 Auto Posts: 172	Boost Guage Install Aug 5, 2006 17:12:46 GMT 11 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Paaji on Aug 5, 2006 17:12:46 GMT 11 Champions. Thanks for the advice. Think I'll use the waste gate line. Cheers, J