|
Post by blingbling on Apr 18, 2005 22:53:09 GMT 11
i have isuzu mu 93 and i was wondering where can i find dealer who sell lift's kit in auck area thanks
|
|
|
Post by geeves on Apr 19, 2005 19:34:17 GMT 11
All 4wd shops should be able to show you a kit or make somthing from there stock books. Also most tyre and suspension shops should be able to manage except most of them have got lazy selling unlift kits to boy racers. All you need to buy is 4 shocks and 2 rear springs unless you also have a winch in which case torrsion bars could be a good idea. Torrision bars can be adjusted with no drama except that a ball joint flip will be needed to get the wheel alingment right. Standard shocks are ok for up to 50mm lift.
|
|
crazydave
Isuzu Baby
MAKE IT TO THE TOP OR BREAK IT TRYING
Posts: 13
|
Post by crazydave on Jun 30, 2005 18:30:40 GMT 11
I get all my gear from www.genie4x4.com and these guys are really good with lots of helpfull info. NZ based company with tons of stuff for your isuzu! Check them out.
|
|
|
Post by geeves on Jun 30, 2005 18:52:47 GMT 11
Yes Craig from Genie is a nice guy and knows his stuff I met him on a trip into Odlins road and his prices are very reasonable. But for heavy things like suspension freigt would be a killer. He has freight prices on his site. A lot of suspension parts are suplied via Auckland so sending them to Auckland via Wanganui might be counter productive
|
|
Fonganui
Isuzu Baby
1995 Bighorn Plaisir, Full TJM XGS Suspension 2"inch lift,33x12.5xR15 MT's on 15x8 steel rims.
Posts: 1
|
Post by Fonganui on Jul 9, 2005 14:55:07 GMT 11
I only recently had a full TJM XGS suspension kit fitted giving me 2 inch lift all round on my 95 Bighorn. The kit consisted of gas shocks front and rear, rear coil springs and front torsion bars at a cost of $1950 supplied and fitted by Fully Equipped, East Tamaki.
|
|