torsion bars on b/horn

muskie Isuzu Baby Posts: 28	torsion bars on b/horn Jan 14, 2007 8:40:55 GMT 11 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by muskie on Jan 14, 2007 8:40:55 GMT 11 is replacing torsion bars ralatively easy, anyone here done it, never done them before so any pitfalls to watch out for?? thanks

geeves Administrator Most Posts & Most Helpful AWARD Posts: 4,833	torsion bars on b/horn Jan 14, 2007 9:07:25 GMT 11 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by geeves on Jan 14, 2007 9:07:25 GMT 11 Only trap I know of is to disconnect the sway bar before adjusting the hight Otherwise you can get the car level but have different tension on each side. Causes very strange handling.

isuzumudman Isuzu Junior Posts: 92	torsion bars on b/horn Jan 19, 2007 16:47:57 GMT 11 Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by isuzumudman on Jan 19, 2007 16:47:57 GMT 11 Hey, thanks for that tip Geeves. I've been mucking about with my trim height for ages. I'll try it out this weekend.