Clutch on 2.8TD MU

[blumu76]

Hi guy's my name is Dave and i have been a proud owner of a 91 MU for the last few years with little problems. I have been keeping an eye on your web site and think you are doing a great job- well done. I have registered because I am now in a position where I have to do a little bit of work to my MU and i am hoping that you may be able to help me with a little bit of technical info. I need to replace the clutch and I am hoping that someone can give me an Australian part no. and torque settings for the clutchplate and flywheel, and whilst I'm going the part no for the rear main seal and also a rocker cover gasket(I've got the blocked PCV thing going) Are all these parts the same as TF Rodeo's? Look forward to your reponse- cheers

[Jimmu]

I had mine replaced by my local mechanic.
It was a heavy duty Rodeo replacement.

Cost $660

Dont have the numbers though.

Jimmy.

[Harry]

Hi,Dave.Can't help with part nos although I think I've got a Supacheap no for the rear seal somewhere.Torque figures are :pressure plate 20Nm/15lbft,flywheel 118Nm/87lbft.
Supacheap supplied all the seals I needed but the front cam seal was the wrong one,and I couldn't convince them otherwise.
Hope that helps,Harry.

[blumu76]

Thanks guy's. the info is greatly appreciated- touch wood the clutch kit doesn't cost as much as the one I just installed into a TF Rodeo V6- $1100 and that is trade and non- genuine!!!!!!