Gobbles
Isuzu Junior
92' 2.8L TD MU - Black + Panel Damage
Posts: 121
|
Post by Gobbles on Jun 12, 2005 12:09:51 GMT 11
Hey guys,
Just a quick question as odd as it may be, but i cant find anyway to check the level of the oil in my manual transmission and if need be how do I top it up? or do i straight out replace it all in one hit?
Thanks
Kurt.
|
|
|
|
Post by geeves on Jun 12, 2005 12:46:48 GMT 11
On the right hand side of both the gearbox and transfer case there is a large flat bolthead about halfway up the casing. This is the fill hole and correct level.Ie fill til it overflows let it stop overflowing then put bolt back. I put my finger into the hole to check the level. Remember that the transfer case and gearbox have separate oil chambers. Also I have heard that if the seal goes between the gearbox and transfer case all the gearbox oil drains into the tranfer case so gearbox will be empty and transfer overfull.
|
|
Gobbles
Isuzu Junior
92' 2.8L TD MU - Black + Panel Damage
Posts: 121
|
Post by Gobbles on Jun 12, 2005 23:02:23 GMT 11
On that topic geeves.....the gearbox breathers...will i be able to find them and extend them easily enough? Got a job to keep me occupied tomorrow...
Cheers
Kurt
|
|
|
|
Post by geeves on Jun 13, 2005 7:26:31 GMT 11
Lift the boot over the transfer lever and you will find them in plain view. Easier than most things Isuzu
|
|
