|
|
Post by timster on Jul 1, 2007 12:25:58 GMT 11
Does anyone know what the part number for a rear axle seal for a 94 MU is?
The jackaroo one is slightly smaller.
Repco doesn't list one.
It size is approximately:
Outer 72mm
Inner 52mm
Width 10mm
|
|
|
|
Post by timster on Jul 14, 2007 10:19:28 GMT 11
A Kelpro 97302 seems to be right, $16 from autobarn
|
|
|
|
Post by geeves on Jul 14, 2007 15:58:57 GMT 11
Sorry didnt find this post earlier. The Mu rear axle is the same as 88 - 91 jackeroo unless it has the drum in disc handbrake
|
|
|
|
Post by timster on Jul 14, 2007 22:39:21 GMT 11
It has the drum in disc handbrake.
Does this mean it's something else?
|
|
|
|
Post by geeves on Jul 15, 2007 10:57:12 GMT 11
Good question. I dont know. The jackeroo diff of the same year I would of thought was the same but the Mu has a narrower diff so who knows what was in the parts bin when they made it. If the seal you have fits and works it must be right
|
|
|
|
Post by Roger on Jul 28, 2007 11:54:12 GMT 11
Try Holden Rodeo wheel bearing seals or Holden Frontera (3 or 5 door, not sure) for the rear diff pinion seal.
Those are the parts my mechy put in years ago, so he said.
My MU is a 3.1 update with LSD. Don't know if it makes any difference, I think the running gear should all be the same.
Hope that helps
|
|
