|
|
Post by maletimaru on Sept 4, 2005 15:36:29 GMT 11
I am talking about the height from ground to underneath the arches?
I feel my Mu is lower than most as my rear is 855mm and my front (now raised 20mm by Torsion bars) is 886mm!!!!!
Is this low or what? Anyone know the stock standard answer for the 1991 2.8DT Mu?
|
|
|
|
Post by geeves on Sept 4, 2005 20:03:11 GMT 11
What tyres are you wearing? Its not that far from stock if you have small tyres
|
|
|
|
Post by maletimaru on Sept 5, 2005 20:47:10 GMT 11
That's just it I have 31x10.5xr15 on them!!! Although the tyres are half empty being only 5mm left on each!
|
|
|
|
Post by geeves on Sept 6, 2005 9:17:36 GMT 11
My bighorn is 890 each end with 31x10.5x15 tyres and a 30mm lift.Look for a thread "how high has your Mu been lifted" for other comparisons
|
|
wayne
Isuzu Baby
Love mods
Posts: 47
|
Post by wayne on Sept 7, 2005 7:18:12 GMT 11
If you want your Mu to handle on the road you want the front about 10mm lower than the back.
W.
|
|
HiMuZuLux
Isuzu Junior
IFS: A great reason to own a 9" angle grinder :)
Posts: 125
|
Post by HiMuZuLux on Sept 7, 2005 14:33:43 GMT 11
If you want your Mu to handle on the road you want the front about 10mm lower than the back. W. If you want your MU to handle on the road you should buy a corolla... your MU is a 4WD ;D Just stirring  Steve PS: Hey Wayne... looong time no see... (Think back a few years - red double-cab Hilux...) |
|
|
|
Post by maletimaru on Sept 7, 2005 15:52:32 GMT 11
I am getting 2 springs added to the rear as i am having a sub and amp set up weighing quite a bit in the rear!!!
It will be a show car year after next but for now will be a 4wd!!! with sounds and neons and tints and decals!!! lol
|
|
|
|
Post by geeves on Sept 7, 2005 16:35:12 GMT 11
Once its been a proper 4wd it will never be a show car. The inevitable scrates and little bangs will cost more to get rid of and bring back to better than new than a complete new car. How heavy are these subs and amp The Mu has a very good load capacity even on original springs or will these subs be capable of shattering concrete bridge pillars.
|
|
|
|
Post by maletimaru on Sept 7, 2005 22:54:07 GMT 11
yeah they will - i have made a custom interior floor and enclosure for the subs and amps (will have two batteries in there too when finished
|
|
|
|
Post by maletimaru on Sept 7, 2005 22:54:44 GMT 11
Having said that I want it to be 880 or higher inthe rear too to avoid towbar from dragging its ass on floor!
|
|
|
|
Post by maletimaru on Sept 9, 2005 8:47:55 GMT 11
Been informed yesterday that I have had my front raised heaaaaps now - am at 905 or 910mm!!! yay!!! and i had plenty of travelk left in suspension so no wonder the ride was so hard at standard height!
|
|
